Phoenix ModCom™ Hi LED Floodlight

Introduction

The ModCom™ Hi LED Floodlight is an instant-on, surface mounted fixture designed for applications that need more light or have higher mounting heights. Solid state lighting technology is extremely energy efficient and very low maintenance even in the harshest of installations. Designed for versatility, the ModCom™ Hi LED Floodlight has an adjustable mounting harp.
 

Construction
Steel mounting harp

Low-copper content aluminum frame, LED module and cover
Marine-grade, stainless steel hardware
LED module lens is UV-resistant, impact-resistant polycarbonate

 

Light Source

Cree or Luxeon® Rebel light emitting diode (LED) modules
Up to 25,000 lumens and 300W
CRI > 70
CCT of 5400K
LED rated life is 50,000 hours
Conformal coated circuit boards 

 

Driver
120-277V, 50-60Hz; 347V; 480V
3KV surge protection
Greater than .98 power factor (at 115V)

Overload, over-voltage, over-temperature, and short circuit protection
Designed to meet the EMC standard
Fully potted to prevent vibration wear 

 

Wiring
Stranded wires
Internal and external wires are sleeved
 
 
Ambient Operating Temperature
-40°C to 35°C
 
 
Finish
White thermoset powdercoat
 
 
Compliances

ETL/cETL Certified to
        UL 1598 Ordinary Wet Locations
             1598A Marine Outside Type (Saltwater)
             844 Hazardous Location (Pending)
                       Class I, Division 2
         CSA C22.2 No. 250.0
IP67 Rated

 ~See specification sheet for more information~

© 2011 Phoenix Products Company, Inc. - 800.438.1214